J0052879 Pinion Outer Bearing Cup for Dana Axles

New replacement Pinion Outer Bearing Cup/Race. When rebuilding your axle it's a good idea to replace the pinion gear bearings and bearing cups. Don't take any short cuts, replace the bearings & cups or races. Replace bearings with pitting, scoring or other damage. There may not be any obvious wear on the bearing cup but most likely there is a groove worn in the race. 1 Outer Pinion Bearing Cup required.

Dana 44 Axle Front or Rear

1966-1973 Jeep C101, C104 Commando with Flanged Rear Axle

1971-1991 Jeep Wagoneer, Front or Rear Axle

1984-1991 Jeep Grand Wagoneer, Front or Rear Axle

1975-1983 Jeep Cherokee Chief, Front or Rear Axle

1974-1988 Jeep J-10 Truck, Front or Rear Axle

Dana 27 Rear Axle

1966-1971 Jeep C101 Commando

1963-1970 Jeep Wagoneer

1963-1970 Jeep J-Series Truck